Rollout - Object Position
Relative Axis - Absolute Axis
Axes representation:

-X axis= from the screen’s left to the right positive values

-Y axis= from the screen’s bottom to the top positive values

-Z axis= getting far from the operator positive values (the object gets far), towards the operator negative values (the object gets closer)
The Absolute Axis are the Axis of the World of 3D GeniuX

To understand you can load and object and rotate it. Select from "management Object" window and change beteween Absolute and Relative mode. See also the 3D Icon Axis on the left of work area.
Object Position
Allows you to move, rotate or re-scale an object into 3D space

> Position X – move the object along the X axis
> Position Y - move the object along the Y axis
> Position Z - move the object along the Z axis

> Rotation X – rotate the object along the X axis
> Rotation X – rotate the object along the Y axis
> Rotation X – rotate the object along the Z axis
> Re-scale X% - re-scale the object along the X axis, this re-scaling option will deform the object.
> Re-scale Y% - re-scale the object along the Y axis, this re-scaling option will deform the object.
> Re-scale Z% - re-scale the object along the Z axis, this re-scaling option will deform the object.
> Re-scale % - re-scale the object along all axes at the same time, this re-scaling option allows you to re-scale the object without deforming it.

>Reset: Go back to the original values.

NOTE: numerical values indicated in these fields are expressed in generical measuring units by the software, and do not represent real measuring units such as metres, centimetres or inches.
Move, Rotate, Scale effect without X, Y, Z axes limits
Move, Rotate, Scale limited to Y axis