See specific importing limits
 |
Let’s
consider a simple object:
Figures>Poser 1-4>Poser4 Hi>P4 Nude Woman and load: Poses>Pose>Female Poses>Lying Down>Lying Down 10 |
 |
1.
VERIFY FACES NUMBER It is necessary that the number of faces is not superior to 64.000. If the Mesh has a superior number of faces, we suggest dividing it into different objects, that will then be selected and at the same time exported into a single file. A single file can contain up to 500 Mesh, each containing 64.000 tripled polygons. |
 |
2.
SET THE PIVOT The coordinates 0,0,0 will be used by 3D GeniuX as the object’s Pivot. To centre the pivot point within 3D GeniuX use the Centre Object tool  . |
 |
3.
MATERIALS AND UV MAPPING It is possible to apply UV mapping and materials mapping because some exporting formats maintain these data, thus allowing 3D GeniuX to read them. If the textures are in the same folder as the 3D object, the software will load them automatically, otherwise if they are in different folders it will be necessary to reassign them to each single part, from the “Properties” window>Load Texture. In some cases it will be necessary to adjust the base colour of the object inside the 3D GeniuX “Properties” window, setting the values to the white R=255, Y=255, B=255 |
 |
File>Export
|
 |
Recommended setting. |
 |
Select one or more objects with a multiple selection |
 |
Recommended setting. |
 |
Recommended setting. |
PLEASE
NOTE: the DXF format not maintain the UV mapping coordinates. 3D GeniuX
maps automatically with a cubic map these objects. You can apply UV
mapping coordinates with 3D GeniuX in the "Texture Mapping" rollout.
In some cases the DXF objects will be "Facets visualization" because
the DXF format not maintain the normals data.
SOLUTION: export on 3DS format.
SOLUTION: export on 3DS format.
